New Anti-Lift Design Assembly Contains All Necessary Hardware to Complete the Installation with 3/8" or 1/2" (10 or 12 mm) Tempered Glass Brushed Stainless Steel Construction The CRL Laguna Series Single Sliding Door Glass Mount Installation Assembly contains all of the components you will need (except the tempered glass) to complete this style of installation. This model is used in applications where you are attaching a single sliding door in an 'all-glass' opening where you have a wall on one end next to the door, a glass transom above the door, and a fixed glass panel on the other side of the door. Bi-parting double doors are not possible for this application.The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8" (3.2 mm) +/- vertical adjustment to aid in door alignment. This system should only be used with 3/8" or 1/2" (10 or 12 mm) tempered glass. Laminated glass cannot be used.DOOR SYSTEM LIMITATIONSMaximum Door Weight: 220 lbs. (100 kg)Maximum Panel Width: 53-1/2" (1.36 m)Maximum Panel Height: 98-7/16" (2.50 m)Maximum Track Length: 104" (2.64 m)Important NotesNOTETHESE FITTINGS ARE NOT FOR USE WITH LAMINATED GLASS.